Myweigh iBALANCE 1200 Manuel d'utilisateur télécharger pdf

i1200 Owner's Manual (2003-Current Models)

**TROUBLESHOOTING NOTE: Some scale owners (especially with the i2600) have noted that their

scale will give a MUCH more accurate calibration if calibration is performed as quickly as possible (not

pausing between steps). This is especially true in the step after you have placed the calibration weight

on the tray. If your scale is acting inaccurate after calibration, please try recalibrating 'as quickly as

possible'.

Low Batteries, bad battery connections & Faulty AC Adaptors are the #1 cause of scale malfunction

and inaccuracy! We test all of our scale returns from consumers. Fully 60% of consumer returns are

battery related problems. This sounds silly but it's true! A scale will perform slowly, or read inaccurately

when it has low batteries. Please replace the batteries often (and only use good quality batteries). We

include good quality batteries with all of our scales but batteries can run low in storage. If your scale

simply won't turn on while on Battery power, this is often caused by loose battery connections. Battery

prongs (terminals) are made of metal. They must be making good contact with your batteries in order

for the scale to power on. You can use a paperclip to slightly bend the battery prongs to make them

have a better connection. Also some poorly designed batteries have recessed or partially obstructed

battery terminals. This may cause your prongs to be touching the plastic housing of the battery instead

of the metal battery terminal. A Faulty AC adaptor can cause your scale to act unstable with numbers

"jumping" all around. Please test your scale with a good set of batteries (instead of the AC adaptor) to

determine if perhaps the AC adaptor is faulty.

Due to the SS tray of the iBalance, this model is especially prone to being charged with Static Electricity.

Please discharge any static electricity if you think your scale is acting unstable.

SAFETY PRECAUTIONS

All safety messages are identified by the words warning and caution. These words mean the following:

Warning Important information to alert you to a situation that might cause serious injury and damage to

your property if instructions are not followed.

Caution

Important information that tells how to prevent

damage to the equipment.

When using the i500/i1200, the following safety

precautions should always be followed.

Warning: Use only the correct AC adaptor with the

scale. Other adaptors may cause permanent electrical

damage. The i2600 uses an adaptor that is different

from the i500 and i1200. For reference, the i2600

adaptor is pictured here:

1 2 3 4 5

Résumé du contenu

Page 1

i1200 Owner's Manual (2003-Current Models) **TROUBLESHOOTING NOTE: Some scale owners (especially with the i2600) have noted that their scale will

Page 2

Caution: Avoid placing the scale in direct sunlight, this may cause discoloration or malfunction. Replace all batteries at the same time. Do not repl

Page 3

2. Enter calibration mode. Press [ON/OFF] to turn the power off. Press and hold [ZERO] first, then Press [ON/OFF] while keeping the [ZERO] button dep

Page 4

FEATURES Auto shut off. Auto calibration Auto zero tracking and Auto backlight Low battery indication and 8 mode conversion Large LCD (6digits 15 mm h

Page 5

Place the scale on a firm surface that is flat and level for accurate weighing. Weighing Before weighing, a several second warm up time is required a

Commentaires sur ces manuels

Pas de commentaire

Myweigh iBALANCE 1200 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Échelles Myweigh iBALANCE 1200. MyWeigh iBALANCE 1200 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Échelles Myweigh iBALANCE 1200